DRILLING STARCH API 13A | CT-DRILSTARCH
PRODUCT DESCRIPTION
It is a pre-gelatinized non fermenting Starch used to provide filtration Control in all types of water based Drilling Fluid Systems. It is a Non ionic natural Polymer and is highly effective in all waters including high salinity and high hardness waters. It Meets API 13A specifications for starch
​
APPLICATION
It is an economical and very effective filtration control additive. It works well in all water including fresh water, highly saline water, hard water and can be used effectively in most mud systems
​
ADVANTAGES ​
-
It provides economical Method of filtration Control.
-
Can be used in the full range of water types.
-
Stabilizes rheology.
-
Provides well bore stability and filtration control.
-
Non damaging to the formations
​
PROPERTIES
Appearance: White to Cream Colored Free Flowing Powder Free from Extraneous Impurities
Moisture Content: 8% Max
4% Apparent Viscosity: 30 cps Max
Bulk Density: 0.75 – 0.95 Kg/ltr
Fermentation Test: 3 Days Stability Min
PERFORMANCE TEST
4% SALT WATER TEST
DOSE: 1.0% W/V ON MUD
FILTRATE (API 13A, SECTION 11.3A): 10 CC MAX
R 600 (API 13A, SECTION 11.3A): 18 MAX
SATURATED SALT WATER TEST
DOSE: 1.0% W/V ON MUD
FILTRATE (API 13A, SECTION 11.5): 10 CC MAX
R 600 (API 13A, SECTION 11.5): 20 MAX
​
RESIDUE GREATER THAN 200 MICROMETERS (API 13A, SECTION 11.7): NO RESIDUE
​
PACKING AND STORAGE
CT-DRILSTARCH is packed in 25 Kg Multiwall Paper Bags or HDPE Bags. Store in a dry location away from sources of heat or ignition, and minimize dust
​
For TDS, MSDS or further enquiries, please write to info@catalystdrillchem.in