WETTING AGENT CT-WET
PRODUCT DESCRIPTION
CT-WET Wetting Agent is a powerful oil wetting agent used to oil wet drill solids in oil-based drilling fluids. Reduced flow properties are commonly seen after small applications of this product. It is a naturally occurring product that can be used in all oil base fluids and is suitable up to 350°F (176°C).
APPLICATION
CT-WET is used as a oil-wetting of solids in oil-based muds and helps increase the resistance of oil-based muds to water contamination.
Which helps to reduce inter-particle forces when formulating very high-density oil-based fluids.
ADVANTAGES
It improve flow properties.
It helps coat the surfaces of shale and other solids
It acts as a secondary emulsifier
PHYSICAL PROPERTIES
Physical Appearance: Amber Viscous Liquid
Specific Gravity: 1.0
Flash Point (PMCC): 93°C
pH (10% aqueous solution): 6-7
RECOMMENDED TREATMENT
Normal treatment range of CT-WET is to add 0.25 - 2.0 lb/bbl (0.71 - 5.71 kg/m) directly into the system.
PACKING AND STORAGE
CT-WET is packed in 5 Gal carboys or 55 gal drums. Store in a dry well-ventilated area
CT-WET is equivalent to DRILTREAT
For any further enquiries, please write to marketing@catalystdrillchem.in